 | |
 | | SYS-1027GR-TRF | - SuperServer 1027GR-TRF (Black)
| | | |
|
Super X9DRG-HF | | | | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP) | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | | | GPU/Xeon Phi Support | - M2090, up to 130W CPU at 30°C
- M2075, up to 130W CPU at 35°C
- K10/K20/K20X/K1/K2 (Kepler), up to 130W CPU at 30°C
- Xeon Phi, up to 130W CPU at 30°C
| | | | | Memory Capacity | - 8x 240-pin DDR3 DIMM slots
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC Registered memory (RDIMM)
- Up to 48GB DDR3 ECC and non-ECC UDIMM
| | Memory Type | - 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors
(using ECC memory) | | | |
| | Chipset | | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | | | | |
| | SATA | - 2 SATA 3.0 ports (6Gbps)
- 2 SATA 2.0 ports (3Gbps)
| | LAN | - 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
| | USB | | | Video | | | Keyboard/Mouse | - 1 PS/2 Keyboard/Mouse port
| | Serial Port | | | | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Color | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED | | | | | PCI-Express | - 3x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards) - 1x PCI-E 3.0 x8 (in x16) low-profile slot
- AOC Compatibility Matrix
| | | |
| | Hot-swap | - 4x 2.5" Hot-swap drive bays
| | | | |
| | Fans | - 10x counter-rotating fans with optimal fan speed control
| | | |
| | 1800W (1+1) Redundant 1800W power supply with PMBus | | AC Input | - 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1800W Output @ 200-240V, 10-8.5A, 50-60Hz
| | DC Output | - 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1800W: +12V/150A; +5Vsb/4A
| | Certification |   Platinum Certified
| | | |
| | CPU | - Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
| | FAN | - Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
| | Other Features | | | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
