 |  | | SYS-6015TW-INFB | - SuperServer 6015TW-INFB (Black)
| | SYS-6015TW-INFV | - SuperServer 6015TW-INFV (Silver)
| | | | | Super X7DWT-INF | | | | | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz - Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz | | System Bus | - 1600 / 1333 / 1066 MHz system bus
| | | | | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 64 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
| | Memory Type | - 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 512 MB, 1GB, 2GB, 4GB, 8GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | | | Chipset | - Intel® 5400 (Seaburg) chipset
- ESB2
| | Infiniband | - Mellanox MT25204AD-FCC-D Single-Port
| | SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0, v.1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
| | Network Controllers | - ntel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 32 MB of video memory
| | Super I/O | | | Clock Generator | | | | | | Serial ATA | | | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- Total 4 USB 2.0 Compliant
| | VGA | | | Serial Port | - 1 Fast UART 16550 serial port
| | Infiniband | - 1 External Infiniband Connector
| | | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | | Form Factor | | | Model | | | | | | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | | | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | | | | PCI-Express | - 1 (x16) PCI-e Generation II slot
| | | | | Hot-swap | - 2x 3.5" SATA Hot-swap drive bays
| | | | | 1U SATA Backplane | | | | | Fans | | | | |
| | 980W AC-DC power supply w/ PFC | | AC Input | - 100 - 240V, 60-50Hz, 14-6 Amp
| | +5V sb | | | +12V | | | | | | Software | - Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
| | | | | CPU | - Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of four proprietary fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
