 | |
 | | SYS-6014H-32 | - SuperServer 6014H-32 (Beige)
| | SYS-6014H-32B | - SuperServer 6014H-32B (Black)
| | | |
| | Super X6DHR-3G2 | | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| | SATA | - ICH5R SATA 2-port Controller
- RAID 0, 1, 10, JBOD support
| | SAS | - Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, JBOD support
| | SAS Zero-Channel RAID | - RAID 0, 1, 5, 10, 50
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-SOZCR1
- (Card not included)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- (Optional: AOC-IPMI20-E)
| | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | | |
| | PCI-Express / PCI-X | - 2 x Universal (SXB-E) slots
[1x PCI-X 133MHz & PCI-X 100MHz]
OR
[2x PCI-E (x8)
(Riser cards CSE-RR1U-EL & CSE-RR1U-ELP required)] | | | |
| | SAS | - Two SAS ports (1 internal, 1 external)
- Each SAS port supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | - 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
| | | |
| | Hot-swap | - 4x 3.5" Hot-swap SAS drive bays
| | | |
| | Floppy | - TEAC 3.5" 1.44MB Slim Floppy Drive
| | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | |
| | 1x 1U SAS Hard Drive Backplane | | | |
| | Fans | | | | |
| Cold-swappable 500W AC power supply module with PFC
[ 20-pin, (4-pin, 8-pin = 12V) ] | | AC Voltage | - 100 - 240V, 60-50Hz, 10 Amp Max
| | DC Output | | | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
- Adjustable CPU clock frequency ratio settings (via BIOS)
| | FAN | - Total of five 3-pin fan headers
- 5x fans with status monitoring
- Fan speed control
| | Temperature | - Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal Monitor 2 support
| | LED | - CPU Overheat LED
- System Overheat LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC support
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| |
