 | |
 | | SYS-7045A-CTB | - SuperServer 7045A-CTB (Black)
| | | |
| | Super X7DCA-i | | | |
| | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz | | System Bus | - 1333 / 1066 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Six 240-pin DIMM slots
- Supports up to 48GB 667/533MHz DDR2 ECC Register memory
- Memory must be populated in pairs
| | Memory Type | - 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 512MB, 1GB, 2GB, 4GB, 8GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| | Chipset | - Intel® 5100 (San Clemente) chipset
- Intel® ICH9R + PXH-V
| | SATA | - Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B)
- (Optional: AOC-SIMLP-3) with 3rd LAN support
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
| | Network Controllers | - Intel® Dual 82573V/L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Audio | - High Definition 7.1 Channel Audio
| | Super I/O | | | Clock Generator | | | | |
| | PCI-Express | - 1 (x16) PCI-E slot
- 1 (x4) PCI-E (using x16) slot
| | PCI-X | - 2x 64-bit 133/100MHz PCI-X (3.3V) slots
| | PCI | - 2x 32-bit 33MHz PCI (5V) slots
| | | |
| | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | LAN | | | USB | - 4x USB rear ports
- 6x USB internal header
- 10 total USB ports, 2.0 Compliant
| | Audio | - High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Header
| | Parallel Port | - 1x ECP / EEP Parallel Port
| | | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | | | | |
| | Hot-swap | - 6x SATA Hot-swap Drives
- 2x Spare Trays
| | Peripheral Bay(s) [90o Rotatable] | - 3x 5.25" Peripheral Drive Bays
| | | |
| | SC743 SATA Backplane w/ Enclosure Management | | | |
| | Fans | - 2x 8cm Hot-swappable PWM Cooling Fans
- 1x 9cm Hot-Swappable Rear Exhaust PWM Fan
- 2x Active heatsink w/ heatpipe
| | | |
| | 865W AC power supply (cooling-redundant) w/ PFC | | AC Voltage | - 100 - 240V, 50-60Hz, 12-6 Amp
| | +5V standby | | | +12V | | | +5V | | | +3.3V | | | -12V | | | Certification |  Certified | | | |
| | CPU | - Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend-state Indicator LED
- +5V Standby alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- SDDC Support
| | | |
| Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix ® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
| |
