 | |
 | | SYS-7044H-TR | - SuperServer 7044H-TR (Beige)
| | SYS-7044H-TRB | - SuperServer 7044H-TRB (Black)
| | | |
| | Super X6DHT-G | | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
- OS Compatibility Chart
| | | |
| | Memory Capacity | - Eight 184-pin DIMM slots
- Supports up to 16 GB DDR 333MHz memory, or
- Supports up to 32 GB DDR 266MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR 333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
- Memory Sparing / Mirroring
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + 6300ESB + PXH/V +82541GI
| | SATA | - Marvell® 88SX6081 8-port SATA Controller
- RAID 0, 1, JBOD support
| | SATA | - 6300ESB 2-port SATA Controller
- RAID 0, 1, JBOD support
| | Zero Channel RAID | - Support for Zero-Channel RAID
- (Card not included)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- (Optional: AOC-IPMI20-E)
| | Network Controllers | - 2x Intel® 82541GI Single Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8MB of video memory
| | Super I/O | | | Clock Generator | | | | |
| | Serial ATA | - Ten Serial ATA ports
- Up to ten SATA hard drives supported
- 6300ESB - 2 SATA ports
- Marvell 885X6081- 8 SATA ports
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| | ZCR | - Adaptec 2020SA (Card not included)
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | Parallel Port | - 1 ECP/EEP parallel port
- 1 parallel port header
| | | | |
| | Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit (CSE-PT26)
| | Model | | | | |
| | Height | - Tower: 17.2" (437mm)
Rackmount: 7.0" (178mm) | | Width | - Tower: 7.0" (178mm)
Rackmount: 17.2" (437mm) | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
- Power Fail LED
| | Ports | | | | |
| | PCI-Express | | | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | PCI | - 1x 32-bit 33MHz PCI (5V) slot
| | | |
| | Hot-swap | - 8x 3.5"SATA Hot-swap Drive Bays
| | Peripheral Bay(s) [90o Rotatable] | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
| | | |
| | Floppy | - Panasonic 3.5" 1.44MB Floppy Drive
| | | |
| | SATA Hard Drive Backplane | | | |
| | Fans | - 4x 5000 RPM Hot-swappable Cooling Fans
- 2x 5000 RPM Hot-swappable Rear Exhaust Fans
| | | |
| 760W Triple-redundant AC power supply w/ PFC
[ 24-pin, (4-pin, 8-pin) = 12V ] | | AC Voltage | - 100 - 240V, 50/60Hz, 14-8 Amp
| | DC Output | - 5V + 3.3V ≤ 200W
- 12V Total ≤ 50A
| | +5V | | | +5V standby | | | +12V1 | | | +12V2 | | | +12V3 | | | +12V4 | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V & +5V Standby
| | FAN | - Four 4-pin fan headers
- Four 3-pin fan headers
- 8x fans with status tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Support 3-pin fans
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal control for 8x fan connectors
- PC temperature sensing logic
- Thermal Monitor 2 (TM2) support
| | LED | - System Information LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
| |
