 | |
 | | SYS-6014P-TR | - SuperServer 6014P-TR (Beige)
| | SYS-6014P-TRB | - SuperServer 6014P-TRB (Black)
| | | |
| | Super X6DHP-TG | | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
- OS Compatibility Chart
| | | |
| | Memory Capacity | - Six 184-pin DIMM sockets
- Supports up to 12 GB DDR 333MHz memory or
- Supports up to 24 GB DDR 266MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
| | Memory Type | - DDR333/266MHz Buffered (Registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| | SATA | - ICH5R Controller for 2 SATA ports
- RAID 0, 1, JBOD support
| | SATA | - Marvell 88SX6081 4-port SATA Controller with 3rd-Party Adaptec AIC-8110(4x drive)
- RAID 0, 1, JBOD support
| | Zero Channel RAID | - Support for Zero-Channel RAID
- (Card not included)
- RAID 0, 1, 10, 5, JBOD
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 (Optional [1U: AOC-1UIPMI-B])
| | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10Base-T, 100Base-TX, 1000Base-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8MB of video memory
| | Super I/O | | | Clock Generator | | | | |
| | Serial ATA | - Up to 4 SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA/ IDE devices
- Supports UDMA Mode 5 and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 1x USB internal headers
- USB 2.0 / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial headers
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- UID button
| | LEDs | - Power / Power Fail LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
| | Ports | | | | |
| | PCI-Express / PCI-X | - 1 x Universal (SXB-E) slot for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot] - Supports Full-length add-on cards
| | | |
| | Hot-swap | - 4x 3.5" Hot-swap SATA drive bays
| | | |
| | Floppy | - TEAC 3.5" 1.44MB Slim Floppy Drive
| | DVD-ROM | - Panasonic Slim DVD-ROM drive
| | | |
| | 1x SAS-814 1U SATA Backplane | | | |
| | Fans | - 5x 4cm 12,000 RPM Nidec dual blade counter-rotating fans
| | | 560W (1 + 1) Redundant AC power supply with PFC
[ 24-pin, (4-pin, 8-pin) = 12V ] | | AC Voltage | - 100 - 240V, 50 - 60Hz, 10 - 5 Amp
| | DC Output | | | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V, +3.3V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
| | FAN | - Total of five proprietary fan headers supporting up to 10 fans
- Status monitor for speed control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC support
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS, Intel SST
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
| |
