 | |
 | | SYS-4027GR-TR | - SuperServer 4027GR-TR (Black)
| | | |
Super X9DRG-OF-CPU | | | | | CPU | - Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 150W TDP **) - Dual Socket R (LGA 2011)
| | Cache | | | System Bus | | | Note | † BIOS version 3.0 or above is required | | Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support | | GPU/Xeon Phi Support | - K80, up to 150W CPU at 30°C
- K40 (Atlas), up to 150W CPU at 30°C
- K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C
- Xeon Phi, up to 150W CPU at 30°C
| | | | | Memory Capacity | - 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC RDIMM
- Up to 192GB DDR3 ECC/non-ECC UDIMM
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | AHCI SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 | | SCU SATA | - SATA 2.0 3Gbps with RAID 0, 1, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10Base-T , 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | - Matrox G200 (Nuvoton WPCM450 BMC)
| | Super I/O | | | | | | AHCI SATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| | SCU SATA | - 4x SATA 2.0 ports (3Gbps)
| | LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
| | USB | - 9x USB 2.0 ports total
(4x rear + 4x via header + 1x Type A) | | Serial Port / Header | - 1x Fast UART 16550 ports: 1 header
| | | | | BIOS Type | - 16MB SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| | | | | | Form Factor | - 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
| | Model | | | | | | Height | | | Width | | | Depth | | | Weight | - Net Weight: 80 lbs (36.2 kg)
- Gross Weight: 135 lbs (61.2 kg)
| | Available Colors | | | | | | Hot-swap | | | | | | PCI-Express | - 8x PCI-E 3.0 x16 (double-width) slots
- 2x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 2.0 x4 (in x16) slot
| | | | | SAS/SATA HDD Backplane | | | | | Fans | - 8x 92mm RPM Hot-Swappable Cooling Fans
| | Shrouds | - 1x Air Shroud (MCP-310-84806-0B)
- 1x Air Shroud (MCP-310-84807-0B)
| | | |
| | 1600W 1U Redundant Power Supplies with PMBus | | Total Output Power | - 1000W: 100 - 127Vac
- 1600W: 200 - 240Vac
| Dimension
(W x H x L) | | | Input | - 100-127Vac / 12.9A Max / 50-60Hz
- 200-240Vac / 9.5A Max / 50-60Hz
| | +12V | - Max: 82A / Min: 0.1A (100-127Vac)
- Max: 132A / Min: 0.1A (200-240Vac)
| | 12V SB | | | Output Type | - 25 Pairs Gold Finger Connector
| | Certification |   Platinum Level
[ Test Report ] | | | | | CPU | - Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
| | FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
| | Temperature | - Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
| | Other Features | - Chassis intrusion detection
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
