 | |
 | | SYS-8016B-6F | - SuperServer 8016B-6F (Black)
| | | |
|
Super X8QB6-F | | | | | CPU | - Quad 1567-pin LGA Sockets
- Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX) - 95W
| | QPI | | | | | | Memory Capacity | - 32x 240-pin DIMM sockets
- Supports up to 1024 GB DDR3 ECC Registered memory at 1066/978/800MHz speed
- Memory Mirroring supported
| | Memory Type | - 1333* / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 32GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | | | Chipset | - Intel® 7500 (Boxboro-EX) chipset
- ICH10R
| | SAS | - Broadcom 6Gbps SAS 2108 controller
- RAID 0, 1, 5 support
- BBU (battery backup) extension kit (optional)
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5 support (Windows)
- RAID 0, 1 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® 82576 Dual-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | Super I/O | | | | | | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers (3 ports)
- Total 5 USB 2.0 Compliant
| | VGA | | | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | | | | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Weight | - Gross: 48.5 lbs / Net: 27 lbs
| | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | | |
| | PCI-Express | | | | |
| | Hot-swap | - 3x 3.5" Hot-swap drives supported
| | | |
| SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) | | | |
| | DVD-ROM | - Slim 8x DVD, 24x CD, DVD-ROM (Optional)
| | | |
| | Fans | - 7x heavy-duty counter-rotating fans with optimal fan speed control
| | Shroud | | | | |
| | 1400W high-efficiency power supply with PMBus | | AC Input | - 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
| DC Output
+5V standby | | DC Output
+12V | - 100 Amp @ 100-140V
- 117 Amp @ 180-240V
| | With Power Distributor | - +5V: 30 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
| | Certification | 
Gold Certified
[ Test Report ] | | | | | CPU | - Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
| | FAN | - 10x 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
| | Temperature | - Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
| | Other Features | - Chassis intrusion detection
| | | |
| | Environmental Spec. | - Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
